设为首页收藏本站

蔡司(zeiss)三坐标测量技术专业论坛-国内最专业的三坐标论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
楼主: rolayhorse

坐标系建立

[复制链接]
  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:39 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:42 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:44 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:46 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:48 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:50 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:52 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:54 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:56 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

  • TA的每日心情
    开心
    2021-5-26 02:53 PM
  • 签到天数: 12 天

    [LV.3]偶尔看看II

    5

    主题

    570

    帖子

    1178

    积分

    金牌会员

    Rank: 6Rank: 6

    积分
    1178
    发表于 2019-2-18 13:23:59 | 显示全部楼层
    CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).CALYPSO Tip: Add your company logo to reports.
    By Phil Adair, Applications Engineer
    Personalize your CALYPSO measurement reports by
    exchanging the ZEISS logo on the default report with your
    own company's image. Use the following procedure to
    replace the logo.
    Carl Zeiss Default Report
    1. Create your logo.
    Using an image editing software, create a bitmap (.BMP) of
    your logo. The ZEISS logo on the default report is 60 x 60
    pixels. While the logo can be any size, we recommend a
    maximum of 100 x 100 pixels. Save the logo file to your
    hard drive.
    2. Make a copy of the report template folder.
    The folder that contains the default report template is
    located in zeiss\calypso\opt\om\protform. Using
    Windows Explorer, go to the above location and make a
    copy the default folder and rename it to anything you
    want, such as company_report (do not use spaces in the
    file name).
    回复 支持 反对

    使用道具 举报

    您需要登录后才可以回帖 登录 | 立即注册

    本版积分规则

     
     
    论坛问题支持
    蔡司技术支持
    蔡司论坛群:
    蔡司三坐标交流论坛
    工作时间:
    8:30-17:30
    夜间时间:
    19:30-24:00

    站长微信扫一扫

    小黑屋|手机版|Archiver| ( 苏ICP备17071574号-14 )

    GMT+8, 2024-10-8 11:20 AM , Processed in 0.103107 second(s), 21 queries .

    Powered by Discuz! X3.4

    © 2011-2021 苏州邦恩精密仪器有限公司

    快速回复 返回顶部 返回列表